Quick Look
Benefits:
- Slightly raised look
- Ultra-matte finish
- Soft, muted colors
Available In:
20" Wide Rolls
CAD-COLOR® Soft Foam Printable Heat Transfer Vinyl
Create full color dimensional designs with this printable HTV
Order Now
Details
User Guide
Open this ordering wizard full window
Material Overview
Use your print/cut system to create unique designs that add a raised effect to any item you’re decorating. With its smooth, velvet-like texture, Soft Foam is perfect for creating premium looks for everyday fashion, spirit wear, athletics, and more. Due to the porous texture of the material, printed designs will have a matte finish with soft, muted colors.
- Specialty printable HTV with a slightly raised look
- Soft, muted, ultra-matte finish
- Not recommended for finely detailed designs
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printer
- Recommended mask: Medium Tack Magic Mask®
- Part of our $7.50 Flat Rate Ground Shipping Program
- Soft Foam is available as full color pre-printed patterned rolls in CAD-CUT® Patterns
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Polyester, Non-Pressure Sensitive
- Thickness: 0.59 mm
- Stretch & Rebound: 1
- Color Fastness: 4-5
- Washability: 50
- Dry Time: 2-4 hours
- Safety: PVC free and CPSIA Certified
CAD-COLOR® Soft Foam Printable Heat Transfer Vinyl
Application Instructions
Application Instructions
Time:
15 seconds
Temperature:
302°F/150°C
Pressure:
45psi (3 to 4)
Peel:
Hot
Print/Cut Instructions
- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Material/Fabric Compatibility
Care Instructions
Machine wash cold inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in room temperature around 68 degrees Fahrenheit with low humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Material Combination Instructions
Foreground material:
Background material:
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Graphtec CE6000-60
45°
14
0
25cm/s
Roland GS-24
60°
160
0
25cm/s
Craft Cutter
Setting
Blade
Force
Speed
Cricut
Light Cardstock +
Fine-point Blade
287
N/A
Silhouette
Heat Transfer Flocked
9
33
5
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.