Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/ultraweed-prod-header-03_small.webp
Product Quick Look
Quick Look

Benefits:

  • Effortless weeding
  • Low temp application
  • Matte-finish & soft feel

Available In:

12", 15" or 20" Wide Rolls
CAD-CUT® UltraWeed™ Heat Transfer Vinyl

CAD-CUT® UltraWeed™ Heat Transfer Vinyl

Achieve ultimate results with this easy-to-weed material

Order Now

Open this ordering wizard full window

Details

Material Overview

UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish.
  • Clear carrier for accurate placement
  • Scorch-free application
  • Matte-finish & soft feel
  • Available in 12", 15" and 20" wide rolls
  • Compatible with our Stahls' Rip-Away Appliqué™ Process

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: High-Tack, Clear
  • Thickness: 90-100 microns (.09-.1mm)
  • Washability: 50
  • Safety: CPSIA Certified
  • Laser cutter compatible
User Guide

CAD-CUT® UltraWeed™ Heat Transfer Vinyl

Application Instructions

Application–Heat Press

Time:
12 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Hot
Layering:
Press background color for 2-3 seconds, peel hot. Press foreground layer for 12 seconds, peel hot.
Note: If your garment scorches, turn down the heat press temperature to 280°F/138°C

Application–Home Iron

  1. Set iron dial between Cotton & Linen
  2. Place on flat, hard surface
  3. Cover design with cover sheet or other multi-purpose paper
  4. Press iron with medium pressure (do not slide iron)
  5. Press each section of design for 15-20 seconds
  6. If areas of design lift after application, replace cover sheet & re-press for 10 seconds
  7. Peel carrier cold

1-Color Application Instructions

Time:
12 seconds
Temperature:
260-300°F
Pressure:
Medium
Peel:
Hot

2-Color Application Instructions

Time:
Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds
Temperature:
260-300°F
Pressure:
Medium
Peel:
Hot

Hotronix® 360 IQ™ Hat Press

Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:

Special Notes

If the garment is 50% or more cotton it will require 280°F + degrees.

Craft Cutter Instructions

Cricut
Blade:
Standard
Setting:
Everyday Iron-On
Silhouette
Material Type:
Heat Transfer, Smooth
Blade:
Standard
Speed:
8
Force:
4
Brother
Blade:
2
Speed:
1
Pressure:
4

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material/Fabric Compatibility

Cutter Instructions

Cutter
Blade
Force
Offset
Speed
Graphtec
45°
7-9
0
20cm/s
Roland GS-24
45°
60-90g
.25
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Videos

How to Heat Press: CAD-CUT® UltraWeed™

2021-07-26T14:00:20Z

Learn the step-by-step instructions of how to properly heat press CAD-CUT® UltraWeed™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® UltraWeed™ today simply click the link here https://bit.ly/3yryyRf

Top 3 Reasons To Buy: CAD-CUT® UltraWeed™

2021-04-16T17:15:01Z

Learn about ultimate heat transfer vinyl for any job on the market in CAD-CUT® UltraWeed™. This easy to weed heat transfer material offers you the ability to apply at a low temperature, easy weeding, and is smooth enough to be cut by any kind of vinyl cutter. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® UltraWeed™ today simply click the link here https://bit.ly/3wFZFXP